Kratki AQF 01 Instructions De Montage Et D'utilisation page 35

Checklist:
L.p. Scope
1 General control
Control of gas
2
control system
Combustion
3
chamber control
Control
4
device control
5 Decorative elements
Perform firing up procedure of your gas garden fireplace. Check the
operation of all security systems.
Check if the main burner flame burns steadily.
Check that the main burner burns evenly.
Check the gas connections for leaks.
Check that the cylinder chamber ventilation is not blocked
Check that the gas control system components are not exposed to
high temperatures.
Check that the inner chamber and the elements installed in it are not
exposed to moisture. Check that the connecting cables show no signs
of corrosion.
Check that the control burner is not obstructed by decorative ele-
ments.
Check if the thermocouple is within the control flame. Check whether
the combustion chamber requires cleaning.
Check that all air inlets to the combustion chamber are clear. If neces-
sary, clear the holes.
Check the combustion chamber for signs of corrosion. If necessary,
remove corrosion and cover the defects with a new layer of fireplace
paint.
Check if the main burner ignites smoothly.
Check for a puncture in the circuits
Check that the components of the control system are not exposed
to overheating.
Check if the decorative elements require cleaning.
Check that the decorative elements are not in contact with the glass.
Check if the decorative elements cover the openings venting the
hearth.
Check that the decorative elements have not been damaged.
Actions
EN
35