Kratki AQF 01 Instructions De Montage Et D'utilisation page 34

EN
The knob is in the closed position. They must be pressed in and turned counterclockwise. The thermo-
electric valve after pressing the knob is open (pos. 1), gas is supplied to the control burner. (pos. 2.). The
procedure should be repeated until the control burner lights up. (Fig. 4.)
WARNING! When firing the device, gas also flows to the main burner. Be absolutely careful of
everything in the vicinity of the burner, taking into account the risk of gas accumulation due to
repeated firing attempts, which may result in violent ignition. It is strictly forbidden to place any
objects or to look at the burner up close when trying to fire the device.
Low flame
The knob is in the firing position of the control burner (pos. 2). Gas flows to the main burner at mini-
mum power settings.
High flame
The knob is in the firing position of the control burner (pos. 2). To increase the power to the maximum
power level, and thus also the flame height, or to any intermediate power between the minimum and
maximum power, turn the knob counterclockwise until it locks. The knob is in the maximum power
position. (pos. 3.). (Fig. 4.)
MAINTANCE
ATTENTION!!!
All maintenance work should be carried out on the refrigerated appliance with the gas supply
cut off and the power supply disconnected.
ATTENTION!!!
Gas garden fireplace maintenance may only be performed by a qualified technician.
- The appliance should be periodically inspected at least once a month or whenever the cylinder is
changed.
- Cleaning should take place regularly or as dust or dirt appears on the appliance.
- It is forbidden to make any changes to the device's design.
- The gas garden fireplace should not be cleaned with caustic agents.
- When replacing individual parts, use only original parts available from the manufacturer.
34