Fein MultiMaster FMM250Q Notice Originale page 15

3 41 01 078 06 0.book Seite 15 Dienstag, 16. März 2010 7:39 07
Specifications.
Type
Reference number
Power input
Output
Power supply type
Oscillating frequency
Weight according to EPTA-Procedure 01/2003
Class of protection
Oscillating angle
Emission values for sound and vibration
(Two-figure – specifications as per ISO 4871)
Sound emission
Measured A-weighted sound power level L
in decibels
Measuring uncertainty K , in decibels
wA
A-weighted emission pressure power level measured at the
workplace L (re 20 µPa), in decibels
pA
Measuring uncertainty K , in decibels
pA
Measured C-weighted peak sound pressure level at the
workplace L , in decibels
pCpeak
Uncertainty K in decibels
pCpeak
REMARK: The sum of the measured emission value and respective measuring inaccuracy represents the upper limit
of the values that can occur during measuring.
Wear ear protection!
Measured values determined in accordance with the corresponding product standard (see last page in this Instruction
Manual).
Vibration
Classification of FEIN application
tools according to vibration class
VC0
VC1
VC2
VC3
VC4
VC5
K
*These values are based on a work cycle consisting of
no-load and full-load operation of the same duration. For
information on the vibration class assigned to the appli-
cation tool, please see the enclosed data sheet
3 41 30 335 06 0.
M
ULTI
11 000 – 20 000/min
M
ULTI
(re 1 pW),
wA
Environmental protection, disposal.
Packaging, worn out power tools and accessories should
Weighted
be sorted for environment-friendly recycling. Further
acceleration*
information can be obtained from your specialist dealer.
2
< 2.5 m/s
2
Accessories.
< 5 m/s
2
< 7 m/s
Only use accessories recommended by FEIN.
2
< 10 m/s
2
< 15 m/s
2
> 15 m/s
2
3 m/s
M FMM250 M M
ASTER ULTI ASTER
7 229 36
250 W
130 W
1 ~
11 000 – 20 000/min
1.2 kg
II
1.6 °
M FMM250 M M
ASTER ULTI ASTER
85
3
74
3
96
3
en
15
FMM250Q
7 229 37
250 W
130 W
1 ~
1.4 kg
II
1.6 °
FMM250Q
85
3
74
3
96
3