Using Your Refrigerator; Setting The Operating Temperature; Led Indicators And Control Panel - Beko FSE 1073 Notice D'utilisation

5

Using your refrigerator

Setting the operating
temperature
4
LED indicators and control
panel
There are three coloured indicator
lights located on the front of the
appliance which shows the operating
mode of the freezer.
Green Indicator
the appliance is connected to the mains
and will glow as long as electricity is
available. The green light will not glow
if the thermostat is set to '0' position.
The green indicator does not give any
indication of the temperature inside the
freezer.
Amber Indicator
glow when the fast freeze switch is
on and will continue to glow until the
fast freeze switch is turned off. The
compressor will run continuously while
fast freeze switch is on. Fast freeze
operation is for freezing fresh food.
2
(1): Illuminates when
(2): This indicator will
3 1
Red Indicator (3) Illuminates:
) If the pre-set temperature can not
a
be maintained.
) If excessive amounts of fresh food
b
are placed inside.
) If the appliance door is left open
c
accidentally.
Thermostat knob (5)
is located on the indicator light set.
IMPORTANT:
fast freeze switch, there may be a short
delay before the compressor starts to
operate. This is normal and does not
indicate a compressor fault.
14
EN
5
Thermostat knob
When you press the