Table des Matières
Publicité
ENGINE REMOVAL
2. Install:
Lock washer 1
G
Nut (drive sprocket) 2
G
NOTE:
Tighten the nut while applying the rear brake.
3. Bend the lock washer tab to lock the nut.
4. Install:
Drive chain sprocket guide 1
G
Drive chain sprocket cover 2
G
Screw (drive chain sprocket cover) 3
G
Oil hose and neutral switch
1. Install:
O-ring 1
G
Dowel pin 2
G
Oil hose 3
G
Bolt (oil hose) 4
G
NOTE:
Apply the lithium soap base grease on the O-
ring.
2. Install:
Spring 1
G
Pin 2
G
O-ring 3
G
Neutral switch 4
G
Screw (neutral switch) 5
G
NOTE:
Apply the lithium soap base grease on the O-
ring.
4 - 86
ENG
75 Nm (7.5 m · kg, 54 ft · lb)
8 Nm (0.8 m · kg, 5.8 ft · lb)
8 Nm (0.8 m · kg, 5.8 ft · lb)
4 Nm (0.4 m · kg, 2.9 ft · lb)
Publicité
Table des Matières
