Table des Matières
Publicité
OIL FILTER ELEMENT, WATER PUMP AND RIGHT
CRANKCASE COVER
2. Install:
Right crankcase cover 1
G
Bolt (right crankcase cover) 2
G
NOTE:
Apply the engine oil on the impeller shaft
G
end.
Mesh the impeller shaft gear 3 with primary
G
drive gear 4.
Tighten the bolts in stage, using a crisscross
G
pattern.
Kickstarter crank
1. Install:
Kickstarter crank 1
G
Washer 2
G
Bolt (kickstarter crank) 3
G
NOTE:
Install the kickstarter crank so that the kick-
starter crank is as vertical as possible with the
distance a between the kickstarter crank and
the frame being 8 mm (0.31 in) or more.
2. Install:
Oil hose 1
G
Bolt (oil hose) 2
G
3. Install:
Copper washer 1
G
Oil delivery pipe 2
G
Union bolt (M8) 3
G
Union bolt (M10) 4
G
4 - 61
ENG
10 Nm (1.0 m · kg, 7.2 ft · lb)
33 Nm (3.3 m · kg, 24 ft · lb)
8 Nm (0.8 m · kg, 5.8 ft · lb)
18 Nm (1.8 m · kg, 13 ft · lb)
20 Nm (2.0 m · kg, 14 ft · lb)
Publicité
Table des Matières
