Yamaha YZ250F 2004 Manuel D'atelier Du Proprietaire page 404

Masquer les pouces Voir aussi pour YZ250F 2004:

Table des Matières

KICK SHAFT AND SHIFT SHAFT

Apply the engine oil on the roller and shift

When installing the shift pedal onto the shift

shaft, be sure that the center of the shift pedal

is about 1 mm (0.04 in) a above the top of the

Kick shaft assembly

Make sure the stopper a of the torsion spring

fits into the hole b on the kick shaft.

Torsion spring 3

Shift shaft 4

Shift pedal 1

Bolt (shift pedal) 2

12 Nm (1.2 m · kg, 8.7 ft · lb)

Ratchet wheel 4

To kick shaft 8 .

Apply the molybdenum disulfide oil on the

inner circumferences of the kick gear and

ratchet wheel.

Align the punch mark a on the ratchet wheel

with the punch mark b on the kick shaft.

Torsion spring 1

To kick shaft 2 .