Specified Conditions Of Use; Residual Risk - Güde MIG 192/6K Traduction Du Mode D'emploi D'origine

ENGLISH
24
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
The operator is responsible for accidents or risks to
third parties.
In case of any doubts about connection and operati-
on refer please to our customer center

Specified Conditions of Use

Protective gas welding device for the thermal con-
nection of ferrous metals by melting the edges and
feeding in an additive.
Only wire electrodes which are suitable for the
device may be used.
The device is an arc welding device with a limited
duty cycle and corresponds to class A according to
standard 60974-10. The device is suitable for occasi-
onal industrial and commercial purposes, as well as
occasional short work in the hobby and DIY sector.
We have made technical documentation for dismant-
ling, spare parts lists, circuit diagrams and a list of
recyclable materials available for you on the Internet.
You can access the technical documents using the
QR code or the corresponding link below the techni-
cal Data of these instructions.
Observing the safety instructions, the assembly in-
structions and the operating instructions in the user
manual also constitutes part of the proper use.
The valid accident prevention regulations must be
adhered to strictly..
The welding device may not be used:
• in rooms that do not have sufficient ventilation
• in a damp or wet environment,
• in an explosive environment,
• to defrost pipes,
• close to people who have a pacemaker and
• close to flammable materials
Do not use this product in any other way as stated
for normal use. Not observing general regulations
in force and instructions from this manual does not
make the manufacturer liable for damages.
Read and understand the operating
instructions before using the
appliance. Familiarise with the
Please note that our equipment has not been desi-
gned for commercial, craft or industrial use. If the
equipment is used in commercial, craft or industrial
operation or for similar activities, we cannot assume
any liability.
Requirements for operating staff
The operating staff must carefully read the Opera-
ting Instructions before using the appliance.
Since the use of the device if handled incorrectly can
entail considerable risks, only knowledgeable persons
may be entrusted with the use of it.
The operator must be appropriately trained in setting
up, operating and using the machine.
Qualification: Apart from the detailed instructions
by a professional, no special qualification is necessary
for appliance using.
Minimum age: Persons over 18 years of age can
only work on the appliance. An exception includes
youngsters trained in order to reach knowledge
under supervision of the trainer during occupational
education.
Training: Using the appliance only requires corres-
ponding training by a professional or the Operating
Instructions. No special training is necessary. The
operator is responsible for accidents or risks to third
parties.

Residual Risk

Despite the observance of the operating instructions
there still may be some hidden residual risks.
Even when the welding device is operated properly,
there are still residual risks associated with the use
of the device The following hazards may arise in
connection with the construction and design of this
welding device:
• Eye injuries as a result of glare,
• Touching hot parts of the device or the workpiece
(burn injuries),
• In the event of improper protection, the risk of
accidents and fire as a result of spraying sparks or slag
particles,
• Emissions which have adverse health effects as a
result of smoke and gas, in the event of lack of air
and/or insufficient extract ventilation in closed rooms.
Reduce the residual risk by operating the welding de-
vice carefully and properly and follow all instructions..