Remote Control - Vortice ARIANTE TOWER SUPER Notice D'emploi Et D'entretien

ENGLISH

Remote Control

Preparation:
1 remove the remote control from its seat on the rear
of the fan (fig.8);
2 open the cover of the battery compartment (fig.9);
3 Insert 2 AAA batteries, taking care to respect the
polarity as shown on the bottom of the battery
compartment (fig.10);
4 Close the cover of the battery compartment (fig.11).
8
9
16
10
11
Functioning/Operation:
The remote control replicates all the functions of the
main control panel. The remote control provides the
user with 5 buttons, with the same functions as those
on the fan itself. Changes in setting made using the
remote control are shown by the corresponding
indicators lighting up on the fan. Every time you send
a command to the fan, the command indicator on the
remote control lights up (fig.12). A buzzer on the
device confirms that it has received the command
successfully.
+
+