To Adjust Airflow Upward Or Downward; Howto Adjust Tilt; Speed Control; Cleaning - Vortice NORDIK STORM Notice D'emploi Et D'entretien

ENGLISH

TO ADJuST AIRFLOW uPWARD OR DOWNWARD

Tilt fan head to the desired angle. This high velocity fan can be used alone or in
conjunction with air conditioning. Rotating the fan head upward serves to pull air from
the floor and circulate It throughout the entire room.

HOWTO ADJUST TILT

1 Insert plastic knob onto the tilt nut.
2 Rotate knob counter-clockwise to loosen tilt nut.
3 Tilt fan head to the desired angle
4 Tighten the tilt nut firmly by turning the knob clockwise
5 Keep knob for future use.

SPEED CONTROL

Select from 3 speeds - Low, Medium and High (1,2,3 respectfully)
It is normal for the motor to feel warm to touch after continuous operation. This fan
features a thermal cutoff that will automatically shut off should It overheat for any
reason. If this happens, Immediately unplug the fan from the outlet.

CLEANING

WARNING: Unplug from electrical supply source before cleaning.
Use soft damp cloth to clean. Then wipe with dry choth.
Do not use a cleaning solution that is harmful to paints or plastics.
Do not bend the blades.
The motor bearings are permanently sealed and do not require additional
lubrication.
WARNING: This product may be hazardous to small Children; mentally,or physically
impaired people. Adult supervision of this product is strongly suggested.
Please require all operators to read and follow the instructions of operation
for this product, to insure proper understanding and training of how to
operate this piece of equipment.
Do not allow any unsupervised operation by a non-trained adult.
8
Knob
Tilt nut