Operating Instruction; Read And Save These Instructions; Rules For Safe Operation; Tube Base Assembly Instructions - Vortice NORDIK STORM Notice D'emploi Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ENGLISH

OPERATING INSTRuCTION

READ AND SAVE THESE INSTRuCTIONS

CAuTION:
WARNING:

RULES FOR SAFE OPERATION

1
Never Insert fingers or any other objects through the grill guard when fan Is In
operation.
2
Unplug power cord when moving from one location to another.
3
Unplug power cord when removing grill for cleaning.
4
Make sure fan Is on a stable, flat surface when In operation.
5
DO NOT use fan In windows. Rain and moisture may create electrical hazard.
CAuTION:
WARNING:

TUBE BASE ASSEMBLY INSTRUCTIONS

1
Remove the two screws, lock washers and flat
washers from V shape tube, keep for using
later.
2
Slide one end of the V shape tube into the end
of the fan tube with the smaller hole.
3
Slide the other end of the V shape tube into
the other end of the fan tube with the larger
hole.
4
Align the screw holes and secure with the
screws, lock washers and flat washers from
step 1. (See Figure 1)
NOTE: The screws must be fully tightened before
the fan operating.
Read and follow all Instructions before Operating Fan.
Do not use the fan if any parts are damaged or missing.
To reduce the risk of fire or electrical shock, do not expose to water
or rain. To reduce the risk of fire or electrical shock, do not use this
fan With any solid state speed control device.
Do not alter the Fan's assembly.
Be sure the FRONT and rear GUARD screws are completely
tightened down in the locked position before operating the fan.
Figure. 1
7

Publicité

Table des Matières
loading

Table des Matières