Functioning; Operation Modes - Vortice ARIANTE TOWER SUPER Notice D'emploi Et D'entretien

ENGLISH

Functioning

Control Panel (fig.6):
1. ON/OFF;
2. Speed Control;
3. Oscillation Control;
4. Timer Control;
5. Functioning Mode Control;
Function Indicators (fig.7):
1.Speed:
- Low
- Medium
- High
2.Timer:
- 1|2 hour
- 1 hours
- 2 hours
- 4 hours
3.Functioning mode:
- Breeze
- Night
6
BUTTONS
1 2
7
LIGHT INDICATORS
2
1
1 1 / / 2 2 H H 1 1 H H 2 2 H H 4 4 H H
3 4 5
3

Operation Modes

Insert the plug into a power socket. Press the ON/OFF
button. The fan starts working in the mode currently
selected, as shown by the function indicators.
You can change functioning mode by pressing the
various control buttons as follows:
1.ON/OFF : switches the fan on and off;
2.Speed Control : selects 3 speeds in sequence:
Low, Medium, and High, corresponding to the three
speed indicators:
: Minimum velocity;
: Medium velocity;
: Maximum velocity;
3.Oscillation control
not the fan oscillates round the axis;
4.Timer Control : you can program the fan to switch
itself off after a certain time. Press the button to
increase this time in intervals of 0.5 hours (up to a
maximum delay of 7.5 hours if you press the button 15
times). The time setting is shown by the time
indicators. The current time setting corresponds to the
sum of the times
1/2H 1H 2H 4H
maximum time of 7.5 hours).
5. Functioning mode control
three functioning modes:
"normal" (indicator off): the fan functions continuously
at the previously selected speed (Low, Medium, or
High);
"breeze": : the fan automatically cycles between all
3 speeds (high, medium, low), to simulate the effect of
a natural breeze. There are three levels of breeze,
depending on what fan speed is currently selected:
strong breeze: if high speed is selected (high speed
predominates in the 3 speed cycle);
medium breeze: if medium speed is selected (medium
speed predominates in the 3 speed cycle);
gentle breeze: if low speed is selected (low speed
predominates in the 3 speed cycle).
"night": fan speed is automatically reduced with
respect to the selected speed to take account of the
drop in body temperature that occurs naturally during
sleep. In other words:
A: If you select the "Night time" function with the fan
set to high speed, the fan will initially operate in
"strong breeze" mode, before switching to "medium
breeze" after 30 minutes, and then to "gentle breeze"
after a further 30 minutes. After this the fan continues
to function in "gentle breeze" mode until it is switched
off (manually or at the end of the Timer setting).
B: If you select the "Night time" function with the fan
set to medium speed, the fan will initially operate in
"medium breeze" mode before switching to "gentle
breeze" after 30 minutes. After this the fan continues
to function in "gentle breeze" mode until it is switched
off (manually or at the end of the Timer setting).
C: Set the fan to "night" mode while it is at minimum
speed to set it into "light breeze" operating mode until
the device switches off (manual or at the end of the
delay set via the Timer).
: you can select whether on
for each indicator
(all indicators lit means a
: selects one of
lit
15