Eco Dect - Gigaset E630 Mode D'emploi

Gigaset E630/E630A / SUG US en / A31008-M2503-R301-1-3S43 / applications_1_SUG.fm / 8/29/19

ECO DECT

Deactivate baby monitor / cancel alarm
Deactivate the baby monitor:
Cancel the alarm:
Deactivate the baby monitor remotely
The alarm is forwarded to an external destination number.
The receiving phone supports tone dialling.
¤
Accept alarm call
The baby monitor is deactivated and the handset is in idle status. The baby monitor settings
on the handset (e.g. no ringtone) will remain activated until you press the display key Off.
The baby monitor cannot be reactivated remotely.
Reactivate:
ECO DECT
The device range is set to maximum as default. This guarantees the best connection between
the handset and the base station. In idle status, the handset will not function (as it is not
transmitting). Only the base station will maintain contact with the handset via a low wireless
signal. During a call, the transmission power automatically adapts to the distance between the
base station and handset. The smaller the distance to the base, the lower the radiation.
To reduce the radiation further:
Reducing radiation by up to 80%
¤
Range
The range is also reduced with this setting.
28
¤
In idle status press the display key Off
¤
Press the End call key
Press keys
page 27
. . . use to select
Change ( = off )
Settings OK ECO DECT
during an alarm
OK Maximum
en fr es