Maico AP 100 Instructions De Montage Et Mode D'emploi page 14

AP 100/100 B/120/150
SG 100/100 B/120/15
5 Technical data
● Weight
● Pressure loss
● Degree of protection (EN 60529)
6 Installation
Before the installation, install the wall sleeve,
which matches the AP shutter/the SG external
grille (WH 100, WH 120 or WH 150), in the
outer wall.
1. Affix the supplied sealing strip all the way
round the housing connections of the shut-
ter/external grille.
2. AP/SG 100/100 B/120: Loosen the housing
at the 4 locking tabs and remove it from the
holder.
3. AP 150/SG 15: Carefully push the housing
from the rear side onto the 4 fixing pins.
4. Mark the 4 drilling positions of the mount-
ing holes on the external wall, drill and
insert dowels.
DE
UK
VENTILATOREN
0.1 to 0.4 kg
10 Pa
IP 20
FR