REBER 9340 N Notice D'utilisation Et Entretien page 65

Line Salvaspesa:
The red led lights: the machine works correctly
The red led doesn't lights: internal problem on pipe or vacuum pumps
Line Family and de Luxe Inox:
The meter gauge arrive on red: the machine works correctly
The meter gauge remains on jellow or on green: problem on the electro valve
The meter gauge don't move: internal problem on pipe or vacuum pumps
WELDING BAR TEST
The welding is not regular or there are some points not sealed: verify the bag is clean and
dry ( if the bag is wet or greased, the seal cannot be done correctly).
The vacuum is loose after few days in a bag under vacuum: it is a tipical bag problem with
little holes; the machine works correctly.
65