Worx WG719 Manuel D'utilisation page 13

unclogging the chute.
g) Mow across the face of slopes, never
up and down. Exercise extreme caution
when changing direction on slopes. Do
not mow excessively steep slopes.
h) Never operate the mower without proper
guards, plates, or other safety protective
devices in place.
i) Do not wash with a hose, avoid getting
water in motor and electrical connections.
1.4 Maintenance
a) Check the blade and the motor mounting
bolts at frequent intervals for proper
tightness.
b) Keep al nuts, bolts, and screws tight to
be sure the equipment is in safe working
condition.
c) Check bag frequently for deterioration
and wear, and replace worn bags. Check
that replacement bags comply with the
original manufacturer's recommendations
or specifications.
d) Replace the blade if it is bent or cracked.
An unbalanced blade causes vibration
that could damage the motor drive unit or
cause personal injury.
e) Sharpen a dull blade equally at each end
to maintain the balance.
f) Clear the blade thoroughly and check its
balance by supporting it horizontally on a
thin nail through its centre hole. The mail
should also be in a horizontal position. If
either end of the blade rotates downward,
remove some metal from the heavy or
lower end until the blade is balanced. It is
balanced when neither end drops.
SAVE THESE INSTRUCTIONS
13AMP Electric Lawn Mower
SYMBOLS
CPSC Danger label
KEEP HANDS AND FEET AW AY
GARDER MAINS ET PIEDS À DI S TANCE
Severing of toes or fingers-Rotary
mower blade
Thrown objects from mower deck
Keep bystanders/children away
Safety alert
Slip on slope
Read the operator's manual
Double insulation
Blade continues to rotate after
the machine is switched off. Wait
until all machine components
have completely stopped before
touching them.
Wear protective gloves.
Lock
Unlock
Before any work on the machine
itself, pull the power plug from
the outlet.
13
EN