Front Panel - Onkyo NS-6170 Manuel D'instructions

> Before Start > Part Names

Front Panel

Part Names

1. ÍON/STANDBY button: Turns the unit on or to standby mode.
2. Remote control sensor
3. Display ( P6)
4. Play button:
: This button stops playback.
∫
/; : Play or pause play.
1
5. MENU/ENTER dial ( )
:/9
When playing, turn left or right to select the folder or file, then press to confirm.
Press and hold to show the settings screen. While the menu is displayed, turn the dial to
select items and press to confirm the settings.
0 Depending on the input, the operation may not start.
6. USB port: Connect a USB storage device or HDD (hard disk drive) to play music files. You can
also supply power (maximum 5 V/0.5 A) to USB devices with a USB cable.
0 When connecting a HDD that requires more than 5 V/0.5 A, connect to the USB port
(maximum 5 V/1 A) on the rear of the unit.
> Install


> Initial Setup > Playback


7. DISPLAY button: Switches the information on the display.
8. INPUT button: Switches the input to be played.
9. RETURN button: Returns to the previous screen.
Advanced Setup | Firmware Update | Others
 
 
E
N
3