Listening To Dab Digital Radio - Onkyo NS-6170 Manuel D'instructions

> Before Start > Part Names

Listening to DAB Digital Radio

1
a
b
c
d
18
> Install > Initial Setup
Tuning
1. Turn the unit on.
2. Repeatedly press TUNER to switch input to DAB.
DAB
0 The very first time you select DAB, the Auto Tuning
function automatically scans the DAB Band 3 for the
multiplexes (i.e., stations) available in your area.
Scan: 100%
0 Once the scanning process is complete, the first
station that was detected is selected.
0 If a new DAB station is introduced, or you move to a
new area, press SETUP (c) on the remote controller,
then use "DAB Scan" in "Option" - "Tuner Setting".
3. Select the desired radio station with the cursors (b) on
the remote controller.
Changing the order stations are displayed
You can sort the abailable stations alphabetically or by
multiplex.
1. Press TUNING MODE (d) repeatedly to set the method
for sorting the display order from the following.
Alphabet (default setting) : Sort stations alphabetically.
Multiplex : Sort stations by multiplex.
Displaying DAB Radio Information
1. Press the DISPLAY button (a) repeatedly to display more
information about the selected DAB station.
Broadcast Information
DLS (Dynamic Label Segment) : When tuned to a
station that's broadcasting DLS text data, the text will
> Playback
Advanced Setup | Firmware Update | Others
scroll across the display.
Program Type : Displays the type of program.
Bit Rate and Audio Mode : Displays the station's bit rate
and audio mode (Stereo, Mono).
Quality : Displays the signal quality.
0 - 59: Poor reception
60 - 79: Good reception
80 - 100: Excellent reception
Multiplex Name : Displays the name of the current
multiplex.
Multiplex Number and Frequency : Displays the
number and frequency of the current multiplex.
E
N