Connections With An Amplifier - Onkyo NS-6170 Manuel D'instructions

> Before Start > Part Names

Connections with an amplifier

Install
1
a
2
a
a Analog audio cable
> Install > Initial Setup
NS-6170
You can play the audio from network features such as
internet radio through speaker systems connected to pre-
main amplifiers or AV receivers. Connect to suit the input
jacks on your amplifier.
Connecting with an analog audio cable
The signal is converted to analog in the D/A converter of
this unit and then output to the pre-main amplifier. Connect
the LINE IN jacks on a pre-main amplifier with the included
analog audio cable to the AUDIO OUTPUT ANALOG jack
on this unit.
> Playback
Advanced Setup | Firmware Update | Others
1
a
2
Connecting with a digital optical cable
The signal is converted to analog in the D/A converter of
the pre-main amplifier. Connect the OPTICAL IN jacks on a
pre-main amplifier with a digital optical cable to the AUDIO
OUTPUT DIGITAL OPTICAL jack on this unit.
Integrated amplifier, AV receiver, etc.
E
N
7