Usb Storage Device/Hdd; Basic Operations; Repeat Play - Onkyo NS-6170 Manuel D'instructions

> Before Start > Part Names

USB Storage Device/HDD

Playback
1
2
12
> Install > Initial Setup
a
d
> Playback

Basic operations

You can play music files by connecting a USB storage
device or HDD (hard disk drive) to the USB port on the front
b
or rear of the unit.
0 The USB port on the front supports a maximum 5 V/0.5 A
power supply. If the HDD requires more than this,
connect to the USB port (maximum 5 V/1 A) on the rear
c
of the unit.
1. Turn the unit on.
2. Press USB to select "USB (F)" (USB port on the front
panel) or "USB (R)" (USB port on the rear panel).
e
3. Plug your USB storage device or HDD into the USB port
on the front or rear.
4. Press ENTER (e) after reading is complete.
5. Select the folder or music file with
remote controller and press ENTER (e) to confirm. To
return to the previous display, press
f
6. Use play buttons (b) to stop play or choose tracks to play.
0 The display of album name and artist name is supported
with MP3/WMA/Apple Lossless/FLAC/AAC/DSD (DSF
only) format music files.
0 Characters that cannot be displayed by this unit appear
as "¢".
0 The USB port of this unit conforms with the USB 2.0
standard. The transfer speed may be insufficient for
some content you play, which may cause some
interruption in sound.

Repeat play

1. Repeatedly press REPEAT (a) during play to display
or
: Repeat play of the selected individual track.
: Repeat play of all tracks within a folder.
To cancel repeat play, press REPEAT (a) several times
Advanced Setup | Firmware Update | Others
USB ( F )
/ (d) on the
(f).
on the display.
E
N