Display; Install - Onkyo NS-6170 Manuel D'instructions

> Before Start > Part Names

Display

1. ASb: Lights when "Auto Standby" (
2. DSD: Lights when the audio signal being input is DSD.
3. Lights when remote controller cursor operations are possible.
4. Displays the play status.
5. Lights when automatic tuning is selected as the method for tuning radio stations.
6. Lights when FM stereo is being received.
7. Lights when tuned into a radio station.
8. DIMMER indicator: Lights when you have pressed DIMMER to turn the display off.
9. Message display: Displays information about tracks and menus.
0 Characters that cannot be displayed on this unit are replaced with asterisks (
0 The following icons are displayed.
: Folder
: Track title
: Playing
: Paused
: Artist
: Album
: 1-track repeat
6
> Install > Initial Setup
 
ASb DSD
P24) is set to "On".
> Playback
   
AUTO FM ST

: Repeat within a folder
: Shuffle
0 When DIMMER is pressed to turn off the display, the unit may appear the same as if you
had unplugged the unit from the power outlet, but electricity is still being supplied to the
unit. To completely cut the unit off from the power supply, you need to unplug the power
plug (shutoff device) unit from the power outlet.
).
＊
Advanced Setup | Firmware Update | Others
 
E
N