Part Names; Front Panel - Onkyo TX-8250 Mode D'emploi

> Before Start > Part Names

Part Names

Par t Names


Front Panel

1. Í ON/STANDBY button
2. MENU button: Used to display the menu.
MEMORY button: Used to register DAB/AM/FM radio stations.
3. Play (1)/Pause (;) button,TUNING MODE button :
0 Used for play operations when playing Music Server or USB.
0 Switches tuning to an AM/FM station between automatic tuning and manual tuning,
and allows you to select the order for displaying DAB stations.
4. HYBRID STANDBY indicator: Lights if the unit enters standby mode when the features
such as NET Stby are enabled that continue to work when this unit is in standby.
5. Remote control sensor: Receives signals from the remote controller.
0 The signal range of the remote controller is within about 16y/5 m, at an angle of 20° on
the perpendicular axis and 30° to either side.
4
> Install
    
    
> Initial Setup > Playback
 
  
6. DISPLAY button: Switches the information on the display.
7. SLEEP button: Set the sleep timer. Press the button repeatedly to select the time. When
the time set (30, 60, or 90 minutes) has elapsed, the unit switches to standby. If SLEEP
button is pressed after setting, the time remaining until sleep is displayed.
8. Display (P5)
9. SETUP button: You can show advanced setting items on the display to provide you with
an even better experience (P30).
10.Cursors (D / C / B / A), ENTER button: Select the item with the cursors and press
ENTER to confirm. Use them to tune to stations when using TUNER.
11. RETURN button: Returns the display to the previous state during setting.
12.VOLUME
13.PHONES jack: Connect stereo headphones with a standard plug (Ø1/4"/6.3 mm
diameter).
14.PURE AUDIO button/LED: Turns on or off the Pure Audio mode which provides a purer
Supplementary information | Advanced Setup | Others
  
 
