Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

> Before Start
> Part Names
Tuning into Stations by Frequency
It allows you to directly enter the frequency
of the radio station you want to listen to.
1. Press the TUNER button (a) of the
remote controller repeatedly to select
either "AM" or "FM".
2. Press D.TUN button (c) on the remote
controller.
3. Using the number buttons (b) on the
remote controller, enter the frequency of
the radio station within 8 seconds.
0 To enter 87.5 (FM), for example,
press 8, 7, 5 or 8, 7, 5, 0. If the
entered number is incorrect, press the
D.TUN button again and re-enter the
number.
AM Frequency step setting:
Press SETUP on the remote controller,
then use the cursor buttons and ENTER on
the remote controller to select "3.
Hardware" - "AM Freq", and select the
frequency step for your region. Note that
when this setting is changed, all radio
presets are deleted.

∫ Using RDS

RDS stands for Radio Data System and is
a method of transmitting data in FM radio
signals. In regions using RDS, the radio
station name is displayed when you tune
into a radio station broadcasting program
information. Further, when you press RT/
PTY on the main unit in this state, you can
use the following functions.
Displaying Text Information (Radio
Text)
> Install
> Initial Setup
1. While the name of the station is being
displayed on the display, press RT/PTY
on the main unit once.
Text information broadcast by the station
(Radio Text) is displayed scrolling across
the display. "No Text Data" is displayed
when no text information is available.
Search for Stations by Program
Type
1. While the name of the station is being
displayed on the display, press RT/PTY
on the main unit twice.
2. Press the cursors Left/Right on the
remote controller to select the Program
Type you want to find, then press
ENTER to start the search.
0 The Program Types displayed are as
follows: None / News (News reports) /
Affairs (Current affairs) / Info
(Information) / Sport / Educate
(Education) / Drama / Culture /
Science (Science and technology) /
Varied / Pop M (Pop music) / Rock M
(Rock music) / Easy M (Middle of the
road music) / Light M (Light classics) /
Classics (Serious classics) / Other M
(Other music) / Weather / Finance /
Children (Children's programmes) /
Social (Social affairs) / Religion /
Phone In / Travel / Leisure / Jazz
(Jazz music) / Country (Country
music) / Nation M (National music) /
Oldies (Oldies music) / Folk M (Folk
music) / Document (Documentary)
0 The information displayed may
sometimes not match the content
being broadcast by the station.
3. When a station is found, the station
> Playback
Supplementary information | Advanced Setup | Others
flashes on the display. Press ENTER
while this is happening to start receiving
that station. If you don't press ENTER,
the unit continues to search for another
station.
0 If no stations are found, the message
"Not Found" is displayed.
0 Unusual characters may be displayed
when the unit receives unsupported
characters. However, this is not a
malfunction. Also, if the signal from a
station is weak, information may not be
displayed.
c
En
a
b
23

Publicité

Table des Matières
loading

Table des Matières