Step3: Connect Other Cables - Onkyo TX-8250 Mode D'emploi

> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others

Step3: Connect Other Cables

1. Network Hookup
Connect this unit to the network using wired LAN or Wi-Fi
(wireless LAN). You can enjoy Network Functions such as
AM
internet radio by connecting to the network. If you connect
by wired LAN, connect to the router with an Ethernet cable
to the ETHERNET port as shown in the illustration. To
connect by Wi-Fi, after selecting "Wi-Fi" in Initial Setup
(P13), select the desired setting method to configure the
a
connection.
2. AM, FM Antenna Hookup
Move the antenna around while playing the radio to find the
position with the best reception. Use a thumb tack or similar
to attach the FM Indoor antenna to a wall.
FM
FM indoor antenna
c
b
2
a AM indoor antenna, b FM indoor antenna, c Ethernet Cable
En 11