General Description; R2004 Gf Receiver; Specification - ROBBE-Futaba T4YF Mode1 2,4GHz Mode D'emploi

2. general descriptiOn

2.1 t4Yf transmitter
This four-channel hand-held transmitter is equally suitable for
use with model aircraft, boats and cars. If you are a beginner to
model sport, the system's integral Trainer module provides an
easy method of learning the art of model control. The Trainer
system is compatible with all transmitters in the robbe-Futaba
radio control range which feature a six-pin micro-socket. The
T4YF transmitter can therefore be used as a pupil transmitter
in conjunction with many high-performance computer systems
(please see the notes in Section 11 on page 10).
The bank of hardware change-over switches can be used to
reverse any or all of the four channels at the transmitter (servo
reverse). This makes it much easier to install the servos in any
model. The length of the precision sticks is adjustable by the
user.
The transmitter features a charge socket which provides a con-
venient means of recharging the transmitter battery. The power
supply takes the form of four dry cells or four rechargeable NC
/ NiMH cells.
2.2 r2004 gf 2.4 ghz receiver
This small four-channel receiver is a compact unit which is sui-
table for all kinds of models where space is at a premium. The
adoption of 2.4 GHz FHSS technology means: no crystals, no
spot frequency selection, and maximum security from same-
channel interference. Fast frequency hopping provides the best
possible suppression of interference signals.
Frequency Hopping system using thirty channels at 1.5 MHz
channel spacing within the range 2404 to 2447.5 MHz. Maxi-
mum number of simultaneous users: 28.
Not recommended for large-scale model aircraft and jets.
Range: approx. 1000 m
Modellbau Lindinger GmbH
4
skysport t4Yf 2,4 ghz

3. specificatiOn

3.1 t4Yf transmitter
Frequency band: 2404 MHz - 2447.5 MHz
Channel spacing: 1500 kHz
Transmission system: FHSS
Current drain: approx. 77 mA
Power supply: 6 V (4 cells)
Dimensions: 180 x 160 x 50 mm
Weight: approx. 600 g
Not compatible with FASST transmitters.
The transmitter can only be used in conjunction with the recei-
ver stated below.
3.2 r2004 gf 2.4 ghz receiver
Functions: 4 servos
Reception frequency: 2.404 MHz - 2447.5 MHz
Modulation: FHSS
Channel spacing: 1500 kHz
Power supply: 4.8 - 6.0 V (4 - 5 NC / NiMH cells)
Current drain: approx. 40 mA
Weight: 8 g
Dimensions: 39 x 26 x 12.5 mm
e-Mail: office@lindinger.at www.lindinger.at