Electrical Connection - Beko RDNE455E20DS Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 83
Installation
3.4. Electrical
connection
A
WARNING:
connections via extension
cables or multi-plugs.
B
WARNING:
cable must be replaced by the
Authorized Service Agent.
C
If two coolers are to be
installed side by side, there
should be at least 4 cm
distance between them.
Our company shall not be liable
for any damages that will arise
when the product is used
without grounding and electrical
connection in accordance with the
national regulations.
Power cable plug must be within
easy reach after installation.
Do not extension cords or cordless
multiple outlets between your
product and the wall outlet.
Refrigerator / User Manual
Do not make
Damaged power
9 /39 EN
Hot Surface Warning!
Side walls of your product is
equipped with refrigerant
pipes to improve the cooling
system. Refrigerant with
C
high temperatures may flow
through these areas, resulting
in hot surfaces on the side
walls. This is normal and does
not need any servicing. Please
pay attention while touching
these areas.

Publicité

Table des Matières
loading

Table des Matières