Installation In Multiple Combinations - eQ-3 MAX! Mode D'emploi

you are working with a wooden wall, you can pre-
drill 1.5 mm holes to make screws easier to insert.
• Use the screws and plugs supplied to fasten the
mounting plate to the wall.
• Next, attach the frame to the mounting plate.
• Attach the Wall Thermostat. Make sure that the ar-
rows on the back side point upwards and that the
clips on the mounting plate latch into the openings
on the electronic unit.

8. Installation in multiple combinations

You can mount the MAX! Wall Thermostat with the attach-
ment frame provided or use it with frames of other ma-
nufacturers as well as integrate the electronic unit into a
multi-gang frame. In both cases, mounting with adhesive
strips and screws is possible. For mounting with multiple
combinations, make sure that the mounting plate of the
Wall Thermostat is seamlessly aligned to the already fixed
mounting plate/retaining ring.
The MAX! Wall Thermostat is designed to fit into frames
supplied by the following manufacturers:
Manufacturer
Berker
ELSO
GIRA
merten
JUNG
Frame
S.1, B.1, B.3, B.7 Glas
Joy
System 55, Standard 55, E2,
E22, Event, Espirit
1-M, Atelier-M, M-Smart,
M-Arc, M-Star, M-Plan
A 500, AS 500, A plus, A creation
33