Setting Holiday Function - eQ-3 MAX! Mode D'emploi

• Use the (+) and (-) buttons to set the duration of the
Boost from 0 to 30 minutes (0, 5, 10, 15, 20, 25,
30 mins.). Choosing 0 will deactivate this function.
• Confirm the setting with the OK button.
• Subsequently set the valve opening between 0 and
100% in 5% increments with the (+) and (-) buttons.
The larger the valve opening, the higher will be the
heat emitted by the radiator.
• Confirm the setting with the OK button.
If a long "Boost period" and a large valve opening
have been set the radiator can get very hot. After
changing the factory setting check that the radiator
is not heated excessively.
The radiant heat will have no immediate effect if the
radiator is covered up (e.g. by a settee).
If the duration of the "Boost function" is set so that 999
seconds are exceeded (e.g. via the MAX! Cube) the
display will show the duration in minutes.
20. Setting the holiday function (
If you want to maintain a fixed temperature during your ho-
lidays or a party the holiday function can be used.
• Briefly press the Mode button repeatedly until the
suitcase symbol (
• Set the end time until which you want the tempe-
rature to be held.
• Confirm the setting with the OK button.
• Set the end date until which you want the holiday
function to be set.
42
) appears on the display.
)