Week Programme: Examples - eQ-3 MAX! Mode D'emploi

will be maintained until the next phase in the timer pro-
gramme starts.
Programming directly on the device is only possible, if
the device is not taught-in to the MAX! LAN Gateway.

14. Week programme: examples

For each day of the week up to 6 heating phases (13
change settings) with individual temperature settings can
be saved with the Wall Thermostat. The factory settings
are as follows:
Monday - Friday:
from 00:00 to 06:00
from 06:00 to 09:00
from 09:00 to 17:00
from 17:00 to 23:00
from 23:00 to 23:59
Saturday and Sunday:
from 00:00 to 06:00
from 06:00 to 22:00
from 22:00 to 24:00
In the display, bars for heating phases are displayed whe-
never the set temperature for the period is higher than the
set reduction temperature.
If you want a room (e.g. the bathroom) to also be heated
during lunchtime the programming could look as follows:
38
17.0°C
21.0°C
17.0°C
21.0°C
17.0°C
17.0°C
21.0°C
17.0°C