John Bean EHP System IV E AT Instructions D'utilisation page 30

E
F
A
B
2
2
1
30
4.1-1
1
4.1-6
4.1-7
Operation Manual - EHP System IV E AT - Tire Changer
G.
Automatic Head
H
The automatic head consists of a tire demounting
section (1, Fig.4.1-6) and a mounting section (2,
Fig.4.1-6), controlled by the pneumatic control (3,
Fig.4.1-6).
The control (3, Fig.4.1-6), moves the claw (2, Fig.4.1-6)
to extract and remove the tyre from the rim, with the
following movements:
G
- Lever down; the head lever moves up
- Lever up; the head lever moves down.
D
C
H.
Bead pusher
The bead pusher tool (1, Fig.4.1-7) fitted on the
articulated arm has a pneumatic control (2, Fig.4.1-7)
for vertical movement.
Lever up; the bead pusher moves up.
Lever down; the bead pusher moves down
3
WARNING: THE OPERATIONS COULD BE
DANGEROUS. FOLLOW THE SAFETY INDICATIONS
SET OUT IN THE PLATES
WARNING: DANGER OF HANDS BEING CRUSHED
Operator's Manual