Network Installation - HP LaserJet 2200 Serie Guide De Mise En Marche Rapide

Network Installation

The software on the HP LaserJet 2200 CD supports network
installation with Novell NetWare 3.2, 4.x, and 5.x or a Microsoft
network (except Windows 3.1x). For network installation on other
operating systems, go to http://www.hp.com/support/net_printing.
Note The HP Jetdirect print server included with the HP LaserJet 2200dn
or 2200dtn printer has a 10/100 Base-TX network port. If you need an
HP Jetdirect print server with another type of network port, see your
electronic user guide (located on the HP LaserJet 2200 CD) for
ordering information, or contact your local HP dealer.
Before You Install the Printer Software
Windows installation will walk you through the following:
18
To make sure that the HP Jetdirect print server is configured
correctly for the network, print the self test/configuration pages
(when the printer's Ready light is on, press and release the
and J C buttons simultaneously). On the second page
OB ANCEL
look for "Hardware Address" followed by a 12-digit number.
You may need this hardware address number to complete
network installation.
If you are installing the software on Windows NT 4.0,
Windows 2000, or Novell NetWare, make sure you have
administrator privileges.
Connecting your printer to a Novell NetWare server. (Answer Yes
when prompted from the Novell Server Detected screen.)
Connecting your printer to a networked Windows print server.
(Follow the "Client Setup" path from the Network Setup screen.)
Connecting your printer directly to the network without going
through a print server. (Follow the "Server or Peer to Peer" path
from the Network Setup screen.)
Connecting your printer to a network, when you are not sure
which method is right for you. (Follow the "Help me to determine
which setup is right for me" path from the Network Setup screen.)
G
O
ENWW