Connect To Additional Computers On A Network - HP DESKJET 3000 J310 Serie Mode D'emploi

About networking
Change the HP Deskjet from a USB connection to a
network connection
If you first install the HP Deskjet with a USB connection, you can later change it to a wireless network connection.
Windows
1. Click Start > All Programs > HP > HP Deskjet 3000
J310 series, then select Connect new Printer.
2. On the Connectivity Choice screen, click Network.
3. When prompted to connnect the USB cable, check
the box for USB cable is already connected to
continue.
4. Use the wireless connection setup wizard. You
need to know your wireless network name (SSID)
and Wireless Password (WPA passphrase or
WEP key) if you are using either of these wireless
security methods. In some cases, the software may
be able to find these for you.
Note: When finished, you have both a USB and
network printer icon in the printer's folder. You can
choose to keep or delete the USB printer icon.

Connect to additional computers on a network

You can share the HP Deskjet with other computers which are also connected to your home network. If the HP Deskjet is
already connected to your home network and installed on a network computer, for each additional computer you only need
to install the HP Deskjet software. During the software installation, the software will automatically discover the HP Deskjet
over the network. Since the HP Deskjet is already connected to your network, you do not need to configure it again when
installing the HP Deskjet software on additional computers.
Wireless setup tips
• If you have a wireless router with a WiFi Protected Setup (WPS) button, press the button during initial setup to connect
wirelessly to your printer. See the router documentation to determine if your router has a WPS button.
• When a wireless connection between the HP Deskjet and the wireless router is successful, the blue wireless light on the
printer will turn on and stay on. If your router does not support WiFi Protected Setup (WPS) or WPS does not successfully
connect, the software installation will guide you through getting a wireless connection for the HP Deskjet.
Mac
1. Insert the product CD in the computer CD/DVD
drive.
2. On the desktop, open the CD and then double-click
HP Installer and follow the on-screen instructions.
3