Philips Sonicare AirFloss Ultra FS1000 Mode D'emploi page 18

18
English
1
2
1
2
8 Place the AirFloss handle in the handle cup and
engage the handle cup to the Fill & Charge
station, running one more cycle and purging
any remaining fluid in between the reservoir
and the handle in the Fill & Charge station.
9 Eject the AirFloss handle and the handle cup,
remove the AirFloss handle from the handle
cup, open the door of the AirFloss handle to
dump out remaining water, or press the
activation button on the handle to spray any
residual water from the AirFloss nozzle until the
handle reservoir is empty.
10 The handle cup of the Fill & Charge station can
be easily removed in order to clean your Fill &
Charge station:
a Remove the reservoir from the Fill & Charge
station base.
b Eject the AirFloss handle and handle cup
and remove the AirFloss handle from the
handle cup.
c To remove the handle cup: pinch the bottom
of the handle cup (using both hands) from its
base from the front and back. Clean the
handle cup with warm water.