Getting Started - Philips Sonicare AirFloss Ultra FS1000 Mode D'emploi

Getting started

2 Place the AirFloss handle into the Fill & Charge
station cup, with the AirFloss reservoir door
facing toward the Fill & Charge station. Make
sure the handle is fully inserted into the handle
cup such that the holes in the handle reservoir
door align with ports in the Fill & Charge station
post.
Note 1: The AirFloss will only charge if placed in
the direction indicated above.
Note 2: The Fill & Charge station can charge
other Philips Sonicare devices, including the
following Philips Sonicare Rechargable Power
Toothbrushes: 3-Series, Flexcare, Flexcare+,
HealthyWhite, HealthyWhite+ and EasyClean.
Before first use, plug in Fill & Charge station and
place handle in handle cup to charge for 24 hours.
1 Remove the reservoir from the Fill & Charge
station base.
2 Remove the reservoir lid and fill the reservoir.
For optimal results with your AirFloss, we
recommend you use an antimicrobial mouth
rinse (such as Philips Sonicare BreathRx).
Note: Recommended to not use with water.
Note: Fill the reservoir only up to the MAX
indication.
11
English