Philips Sonicare AirFloss Ultra FS1000 Mode D'emploi page 12

12
English
Using your Fill & Charge station
1
2
3 Place the reservoir lid on the reservoir.
4 Place the reservoir on the base.
Note: The Fill & Charge station reservoir holds
enough liquid for approximately 23 fillings of
your AirFloss Ultra or 40 fillings of your original
AirFloss.
Note: Do not use with mouthwash containing
isopropyl myristate (e.g. Dental Active) or high
concentrations of essential oils, as it may
damage the product. This includes all
mouthwash sold in glass or ceramic packaging.
Also, do not use with mouthwashes containing
hydrogen peroxide, or rinses sold with opaque
packaging.
1 Lock the AirFloss handle and handle cup into
the Fill & Charge station (click). When you hear
a click, the AirFloss is fully engaged and will
start to fill automatically (you may be able to
hear the pump fill and/or see bubbles
indicating filling).
Note: The Fill & Charge station fills your AirFloss
handle in 10 seconds.
2 Once filled, press the eject button to release the
AirFloss handle and the handle cup (if the eject
button is pressed before the pump stops, the
pump shuts off automatically but your AirFloss
handle reservoir may not be full).