Philips Sonicare AirFloss Ultra FS1000 Mode D'emploi page 15

Charger insertion and removal instructions
To remove the charger
To insert the charger
Your Fill & Charge station charger can be removed
and used separately as a standalone charger for
your AirFloss and many other Philips Sonicare
toothbrush handles.
1 Remove the reservoir from the Fill & Charge
station base.
2 Place the Fill & Charge station base upside
down or on its side.
3 Pull the charger cord from the bottom of the
base and pull the charger out.
1 Remove the reservoir from the Fill & Charge
station base.
2 Place the Fill & Charge station base upside
down or on its side.
3 Insert the charger base from the bottom of the
Fill & Charge station, with the charger peg
sticking up. You will hear a click sound once it is
fully engaged.
15
English