Astralpool JELLY - RGB Manuel D'installation Et D'entretien page 9

These are the available colours:
1
2


5

To select a sequence
The SEQuENCE key allows you to select 1 sequence out of the 8 featured in the system. With
each stroke, you can change the sequence. When you get to the last sequence and hit the key,
you go back to the first. All the sequences are cyclical; when you get to the last colour, they
begin again.
To select the sequence speed
The SPEED key allows you to select 1 sequence speed out of the 8 featured in the system. With
each stroke, you can change the sequence speed. When you get to the last sequence and hit
the key, you go back to the first.
These are the speeds (time in each colour) available:
OrDEr TIME sEC./COLOur
1 0,33
2 2,2
 4,3
 8,4
N.B.: The Remote Control must remain off when you are using the Modulator push buttons.
LED indicator: By observing the operation of the green LED on the Modulator, you can determine
the operational status of the lamp:
• Led turned off:
• Blinking every 2 sec.
• Led remains on:
• Slowly blinking:
• Quickly blinking:
• Blinking for 2 sec.
S I G N A T U R E
Red 7
Green 8
Blue 
Yellow 10
Cyan 11
Purple 12
CHANGE OrDEr
Instant 5
Instant 
Progressive 7
Progressive 8
There is no electrical power.
Lamp with LEDs shut off.
Lamp in FIXED COLOuR or SEQuENCE mode.
TIMER function activated.
LINK function.
Reception of an order from the remote control.

Pale Violet
Sky-blue
Orange
Magenta
Dark green
White/Blan
TIME sEC./COLOur CHANGE
2 Progressive
 Progressive
12 Progressive
315 Progressive