Astralpool JELLY - RGB Manuel D'installation Et D'entretien page 12

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
Turning the projectors off
By hitting the
/ SLEEP key, you shut the projectors off. The state (colour or sequence) of the
lamps will be saved in the memory so that when they are turned on again, they will be in the
same colour or sequence they were in before being shut off.
Turning off the Remote Control
To save battery power, it turns off automatically after 15 sec. If the projectors are shut off with
the Remote Control, it also turns off immediately.
To save battery power, the LEDs only remain on to indicate the duration of the colours when
it is in sequence mode as that is information you could not get just by observing the projector
colours.
To select the colour
The COLOR key allows you to select 1 colour out of the 12 featured in the system. With each
stroke, you can change the colour. When you get to the last colour and hit the key, you go back
to the first.
The colours available are the same ones as described above for the Modulator.
To select a sequence
The SEQuENCE key allows you to select 1 sequence out of the 8 featured in the system. With
each stroke, you can change the sequence. When you get to the last sequence and hit the key,
you go back to the first. All the sequences are cyclical; when you get to the last colour, they
begin again.
To select the sequence speed
The SPEED key allows you to select 1 sequence speed out of the 8 featured in the system. With
each stroke, you can change the sequence speed. When you get to the last sequence and hit
the key, you go back to the first.
The speeds (time in each colour) available are the same ones as described above for the
Modulator.
To select a timed shut off
The SLEEP key allows you to select 1 time out of the 8 featured in the system. Hold the push
button down to select 1 out of the 8 sleep times; 1 of the 8 LEDs will light up on the remote
control indicating how much time is left before the system shuts off:
N.B.: The remote control orders prevail over those from the Modulator.
S I G N A T U R E
ORDER
TIME
ORDER
1
5 min.
2
15 min.

30 min.

60 min.
12
TIME
5
90 min.

2 h
7
4 h
8
8 h

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Jelly - blanc

Table des Matières