Niko 360-45011 Mode D'emploi page 47

360-45011
390-40011
not detect activity, or if a sufficient light level has been reached in the room, the light switches
off automatically after a preset time. Option for manual on/off and dimming via I/O (170-40100).
For use e.g. school premises.
Blackboard lighting:
The 1-channel on/off control module is switched on and off via a push button (170-00000)
(blackboard). The light is switched on for as long as the motion sensor detects activity. The light
switches off automatically after a preset time, if the motion sensors do not detect activity. If the
general lighting is switched off via 170-00000 (door), the blackboard light is also switched off.
Application 14.01
Manual on/off via button, automatic off via external time switch 420-00200 + 1XX-78200
(fig.4e)
The 3-channel daylight control module is switched on and off via a button. The light is controlled in
3 channels in accordance with the set parameters. As the daylight incidence increases/decreases,
the light dims down/up in the premises in order to reach the required, min. light level. The light
is switched off automatically if a sufficient light level has been reached, or via an external time
switch. For use in e.g. production premises.
4. SETTINGS
You can easily program and set the different parameters on the daylight control module by means
of the 4 control keys (see 'Quickguide').
4.1. General set (see 'Quickguide', A and D)
In this menu, you can:
Select the type of application (10.01, 11.01, 12.01, 13.01, 14.01)
Select the number of active channels (1, 2 of 3 zones/ruimtes)
Select the mode:
- Custom: In this mode, you can modify the settings and parameters of the daylight control module.
- Backup: In this mode, you can view the saved settings and parameters of the daylight control
EN 47