Accessories - Niko 360-45011 Mode D'emploi

360-45011
390-40011
Read the complete manual before attempting installation and activating the system.
1. DESCRIPTION
With the daylight control module 360-45011, the lighting can be controlled automatically, depending
on the incident daylight and the motion detection (fig.1). The daylight control module is energy-saving
due to an optimum use of lighting.
The module is preprogrammed for different standard applications and is designed for DIN rail mounting
(4U). The module is suitable for controlling EVSA with 1/10V control. The Power Pack 360-47000 is
used as a voltage supply (SELV) for the daylight control module and for switching the load.
Areas of application: corridors, exhibition halls, office premises, conference premises, school
premises, production premises, canteens, sports halls, lounges, warehouses.

Accessories

- Sensors: - light sensor 350-10011
- motion sensor(s) 350-20010/350-20011
- Manual controls: - push button 170-00000
- switch 170-01100
- 4-fold push button with feedback LEDs 170-40100
- time switch 420-00200 + 1XX-78200
2. INSTALLATION
Cabling
The daylight control module 360-45011 is a SELV system.
Cabling: ±0.5mm diameter for a distance of 200m.
Positioning sensors
See user manual of the resp. sensor.
Note: Always mount the light sensor on a place with incident daylight (see fig.1). In case of sunblinds/
shutters, mount the light sensor in such a way that he is not placed in direct incident daylight.
EN 43