Generac Standby 6438 Manuel De L'utilisateur page 36

Active Alarm
STEPPER Unit will not start in AUTO with utility
OVERCURRENT loss.
Unit will not start in AUTO with utility
MISWIRE
loss.
Unit will not start in AUTO with utility
OVERVOLTAGE
loss.
LOW BATTERY Yellow LED illuminated in any state.
BATTERY
Yellow LED illuminated in any state.
PROBLEM
CHARGER
Yellow LED illuminated in any state.
WARNING
SERVICE A Yellow LED illuminated in any state.
SERVICE B Yellow LED illuminated in any state.
Inspect Battery Yellow LED illuminated in any state.
32
Problem
YELLOW
YELLOW
YELLOW
YELLOW
YELLOW
YELLOW
Things to
LED
Check
Check the
RED LEDs/Screen
for alarms.
Check the
RED LEDs/Screen
for alarms.
Check the
RED LEDs/Screen
for alarms.
Check screen
for additional
information.
Check screen
for additional
information.
Check screen
for additional
information.
Check screen
for additional
information.
Check screen
for additional
information.
Check screen
for additional
information.
Automatic Standby Generator Owner's Manual
Solution
Contact servicing dealer.
Contact servicing dealer.
Contact servicing dealer.
Clear alarm. From the MAIN menu on
the control panel, navigate to the BAT-
TERY MENU. Contact servicing dealer if
battery is GOOD. Replace battery If
CHECK BATTERY is displayed.
Contact servicing dealer.
Contact servicing dealer
Perform SERVICE A maintenance;
press ENTER to clear.
Perform SERVICE B maintenance;
press ENTER to clear.
Inspect battery; press ENTER to clear.