Safety Warnings; Important - Rolair 13GR30HK30 Manuel D'utilisation

Risk from Moving Parts
Risk of Burn
Risk of Injury from Lifting
Flying Objects
Warning
Risk of Unsafe Operation
Caution
Risk of Damage to
Air Compressor or Property
Please note that this product may not be equipped with a spark arresting muffler. If the compressor is operated around flammable
materials or agricultural crops, brush, forests, and grasslands an approved spark arrestor must be installed, maintained and in good
working order. An approved spark arrestor is legally required in the State of California under sections 4442 and 4443 of the California
Public Resources Code Statute section 130050.
This product contains chemicals, including lead, known to the state of California to cause cancer, birth defects, and other reproductive
harm. Always wash hands after handling this product.
Periodic inspection of in-service pressure-retaining items is mandated in your jurisdiction. In addition to performing these inspections,
your jurisdiction may require or permit insurance companies to provide the mandated inspection service for their insured. Information
for your jurisdiction can be found on the National Board of Boiler and Pressure Vessel Inspectors website by typing
www.nationalboard.org/NationalBoard/Members/

SAFETY WARNINGS

Serious injury may occur from moving parts
such as belts, pulleys, flywheels or fans if they
came in contact with you or your clothing.
An electric air compressor with automatic
controls can restart at any time and cause
bodily injury when least expected.
Serious injury may occur if repairs are
attempted with damaged, missing or removed
protective guards, shrouds or missing covers.
Serious burn injuries could occur from touching
exposed metal parts such as the compressor
head, copper/braided discharge lines and
engine exhaust muffler during operation, and
even after compressor is shut down for
sometime.
Serious injury can result from attempting to lift
an object that is too heavy.
Serious injury may occur from loose debris
being propelled at high speeds from the
compressed air stream.
Serious injury or death may occur to you or
others if air compressor is used in an unsafe
manner.
Failure to transport or operate the air
compressor properly may result in major repair
expenses. Oil leaks will damage carpets,
painted surfaces, flooring and other items.

IMPORTANT

in your web browser.
6
(con't)
Never operate the air compressor without
protective belt guards installed. Replace
damaged protective covers or guards
immediately.
Always unplug air compressor and drain air
tanks completely before attempting any repairs
or performing maintenance. Never allow
children or adolescents to operate air
compressor.
All repairs to the air compressor should be
made only by authorized or trained service
personnel.
Never touch any of the exposed metal parts
during operation and for an extended period of
time after the air compressor has shut down.
Do not attempt maintenance on the unit until it
has been allowed to completely cool.
Always obtain assistance from others before
attempting to lift any object that is too heavy
for one person.
Always wear OSHA required "287" safety
glasses to protect the eyes during operation of
the air compressor. Never point the air stream
or tools at any point of your body, other people
or animals. Always turn off the air compressor
and drain tank pressure completely before
attempting maintenance or attaching air tools.
Review and understand all instructions and
warnings in your owner's manual. Know how
to stop the air compressor. Do not operate
until you are thoroughly familiar with all of the
controls. Do not operate the compressor if
fatigued or under the influence of alcohol or
drugs. Stay alert while operating the
compressor and pay close attention to the task
at hand.
Check oil levels daily and maintain proper oil
levels. Always run compressor in a level,
secure position that keeps it from tipping or
falling during use. Do not operate without an
air filter or in a corrosive environment. Always
transport in a level position and use protective
mats to keep truck beds clean, etc. Check
drain bolts regularly and do not overfill
machinery with oil.