Honeywell RedLINK Guide D'installation page 6

RedLINK Installation Guide (EIM)
TM
Link thermostat to wireless network
Zone number
Wireless Setup
0
Zone name
Wireless Setup
36
Back
Wireless Setup
Back
Wireless Setup
Connected
Done
69-2091EFS—05
69-2091EFS_C.indd 6
Press NEXT (always leave zone number set
0
to zero).
Zone numbers 1-4 are for use with
TrueZONE panels only.
Next
M28477
Press NEXT (or see page 11 to change the
52
zone name if needed).
Change zone name only if you have more
than one thermostat and EIM.
Next
M28478
Press CONNECT to establish a link to the wire-
less network.
If E1 appears, see error codes on page 14.
Connect
M28479
After a brief pause, the confirmation screen
at left should be displayed, to verify that the
wireless connection has been established.
Press DONE to display the home screen.
M28480
6
3/11/2009 12:52:50 PM