Switching The Telephone Muting/Attenuation; Switching The Motion Screen; Switching The Ever Scroll - Pioneer SUPER TUNER IIID DEH-P80MP Mode D'emploi

Section
12 Initial Settings
# When the rear output setting is
REAR SP :S/W, you cannot change the subwoofer
controller.
3 Push Multi-Control left or right to
switch the subwoofer output or nonfading
output (full-range RCA output).
Each pushing Multi-Control left or right will
switch between PREOUT :S/W and
PREOUT :FULL and that status will be dis-
played.
Notes
! Even if you change this setting, there is no
output unless you turn the nonfading output
(refer to Using nonfading output on page 51)
or subwoofer output (refer to Using subwoofer
output on page 51) in the audio menu on.
! If you change the subwoofer controller, sub-
woofer output and nonfading output in the
audio menu return to the factory settings.
! Both rear speaker leads output and RCA rear
output are switched simultaneously in this
setting.
Switching the telephone
muting/attenuation
Sound from this system is muted or attenu-
ated automatically when a call is made or re-
ceived using a cellular telephone connected to
this unit.
! The sound is turned off, MUTE or ATT is
displayed and no audio adjustment is pos-
sible.
! Operation returns to normal when the
phone connection is ended.
1 Use Multi-Control to select Telephone.
Telephone appears in the display.
56
En
2 Press Multi-Control to switch the tele-
phone muting/attenuation.
Pressing Multi-Control will switch between
Telephone :ATT (attenuation) and
Telephone :MUTE (muting) and that status
will be displayed.

Switching the motion screen

You can turn the moving source icon display
on or off. When off is selected, the moving
source icon disappears after opening screen
is displayed.
1 Use Multi-Control to select Motion.
Motion appears in the display.
2 Press Multi-Control to turn the motion
screen on.
Motion :ON appears in the display.
# To turn the motion screen off, press
Multi-Control again.

Switching the Ever Scroll

When Ever Scroll is set to ON, CD text infor-
mation scrolls continuously in the display. Set
to OFF if you prefer the information to scroll
just once.
1 Use Multi-Control to select
EVER-SCROLL.
EVER-SCROLL appears in the display.
2 Press Multi-Control to turn the Ever
Scroll on.
EVER-SCROLL:ON appears in the display.
# To turn the Ever Scroll off, press
Multi-Control again.