Xm Tuner; Listening To The Xm - Pioneer SUPER TUNER IIID DEH-P80MP Mode D'emploi

Section
10

XM tuner

Listening to the XM

1 2
3
You can use this unit to control a XM satellite di-
gital tuner (GEX-P910XM), which is sold
separately.
For details concerning operation, refer to the
XM tuners operation manuals. This section
provides information on XM operations with
this unit which differs from that described in
the XM tuners operation manual.
! This unit does not have the text scroll
function.
! With this unit, you can operate one addi-
tional function: XM channel direct
selection.
1 XM band indicator
Shows the XM band which has been
selected.
2 XM preset number indicator
Shows what XM preset has been selected.
3 XM channel name
Shows the channel name of broadcast
channel.
4 XM channel number indicator
Shows to which XM channel number the
tuner is tuned.
5 XM channel select setting indicator
Shows what channel select setting has
been selected. CH NUMBER is displayed
when CH NUMBER is selected, and
44
En
5
4
Category is displayed when CATEGORY is
selected.
1 Press SOURCE to select the XM.
Press SOURCE until you see XM displayed.
2 Press BAND to select a XM band.
Press BAND repeatedly until the desired XM
band is displayed, XM1, XM2 or XM3.
3 To perform tuning, push Multi-Control
left or right.
The channels move up or down step by step.
Channels that cannot currently be selected
are skipped, and the next channel is selected.
# If you push and hold Multi-Control left or
right, you can increase or decrease channel num-
ber continuously.
# You can also perform tuning from a desired
channel category. (Refer to Selecting the channel
in the channel category on page 46.)