Switching The Dsp Setting Mode; About The Xm Ready Mark; Resetting The Microprocessor; Xm Tuner - Pioneer SUPER TUNER III DEH-P9400MP Mode D'emploi

Before Using This Product
S
witching the DSP setting mode
This product features two operation modes: the
3-way network mode (NW) and the standard
mode (STD). You can switch between modes
as desired. Initially, the DSP setting is set to the
standard mode (STD).
• After switching, reset the microprocessor.
• Use a thin standard tip screwdriver to
switch the DSP switch on the side of this
product.
A
bout the XM READY mark
The "XM READY" mark printed on the front
panel of this product indicates that the Pioneer
XM tuner (sold separately) can be controlled
using this product.
Please inquire of your dealer or nearest autho-
rized Pioneer service station regarding the XM
tuner that can be connected to this product.
For operation of the XM tuner, refer to the XM
tuner owner's manual.
7
Note:
• The XM Satellite Radio is developing a new band of
radio in the U.S.A.
The system will use direct satellite-to-receiver
broadcasting technology to provide listeners in their
cars and at home with crystal-clear sound seam-
lessly from coast to coast. XM will create and pack-
age up to 100 channels of digital-quality music,
news, sports, talk and children's programming.
• The XM name and related logos are trademarks of
XM Satellite Radio Inc.
R
esetting the microprocessor
The microprocessor must be reset under the
following conditions:
When using this product for the first time after
installation.
When the machine fails to operate properly.
When strange (incorrect) messages appear on
the display.
• To reset the microprocessor, press
RESET on the head unit with a pen tip or
other pointed instrument.