Pioneer SUPER TUNER III DEH-P9400MP Mode D'emploi page 57

Syntoniseur fm/am et lecteur de cd/mp3/wma, puissance élevée, processeur de signal numérique (dsp) et contrôleur cd/dab
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1. Press ENT and then press MOVIE to
select the movie mode.
2. Press any of the buttons MOVIE1 –
MOVIE4 or ALL to select the desired
movie.
• When you press ALL, you can display
movies 1 to 4 sequentially.
Note:
• The movie screen will disappear temporarily when
you perform other operations, but will be displayed
again after three seconds.
Setting the spectrum analyzer display
There are four stored spectrum analyzer dis-
plays to select from.
1. Press ENT and then press S/A to select
the spectrum analyzer mode.
2. Press any of the buttons S/A1 – S/A4 to
select the desired spectrum analyzer.
Note:
• The spectrum analyzer display will disappear tem-
porarily when you perform other operations, but will
be displayed again after three seconds.
Setting the ASL display
You can display the ASL effect level. (Refer to
page 49.)
• Press ENT and then press ASL to select
the ASL display.
Note:
• The ASL display will disappear temporarily when
you perform other operations, but will be displayed
again after three seconds.
Setting the background visual
The background visuals are only for display
form 1 "FORM1". There are five stored back-
ground visuals to select from.
• When you select "FORM2", "BG" is not dis-
played and this mode is inactive.
1. Press ENT and BG and then press BGV
to select the background visual mode.
2. Press any of the buttons BGV1 – BGV5 to
select the desired visual.
Setting the background still picture
The background still pictures are only for the
display form 1 "FORM1". There are 12 stored
background still pictures to select from.
• When you select "FORM2", "BG" is not dis-
played and this mode is inactive.
1. Press ENT and BG and then press BGP
to select the background still picture
mode.
2. Press NEXT to switch between "BGP1" –
"BGP6" and "BGP7" – "BGP12".
3. Press any of the buttons BGP1 – BGP6
(or BGP7 – BGP12) to select the desired
picture.
Setting the time signal display
You can display the time signal display, which
announces every full hour with a sound and an
animation.
• Press ENT and then press E.CLK to
select the time signal display.
Canceling the entertainment display
You can cancel the entertainment display (the
movie screens, the spectrum analyzer displays,
etc.).
• Press ENT and then press OFF to cancel
the entertainment display.
56

Publicité

Chapitres

Table des Matières
loading

Table des Matières