Pioneer SUPER TUNER III DEH-P9400MP Mode D'emploi page 37

C
hanging band
• Press BAND to select the desired band.
Press BAND repeatedly to switch between
the following bands:
XM-1 = XM-2 = XM-3
S
witching the display
• Press DISP to select the desired display.
Press DISP repeatedly to switch between
the following XM tuner infromations:
Channel number = Channel name = Artist
name/Feature = Song/Program title =
Additional information
Note:
• You can scroll the additional information by press-
ing and holding DISP.
X
M tuner function menu
The XM tuner function menu has the following
functions:
q
q chMODE (channel select)
Press chMODE repeatedly to switch
between the following mode:
Channel number (Channel number select
mode) = Category (Channel category select
mode)
Note:
• If you do not operate the function within about 30
seconds, the display is automatically returned.
S
witching the channel in the
channel category
1. Press FUNC to select channel mode.
2. Press chMODE to select the channel cat-
egory select mode.
Press chMODE repeatedly to switch
between the following modes:
Channel number (Channel number select
mode) = Category (Channel category select
mode)
3. Press BAND to cancel the channel select
mode.
4. Press 5 5 or ∞ ∞ to select a channel catego-
ry.
5. Press 2 2 or 3 3 to select a channel in the
selected channel category.
D
isplaying the ID code (RADIO ID)
Channel number select mode
• Press 2 2 or 3 3 to select the channel num-
ber zero (CH 000).
Channel category select mode
• Press 5 5 or ∞ ∞ to select the channel cate-
gory RADIO ID.
36