Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Section
06
MP3/WMA/WAV Player
Pausing MP3/WMA/WAV
playback
Pause lets you temporarily stop playback of
the MP3/WMA/WAV.
1
Use Multi-Control to select Pause.
Pause appears in the display.
2
Press Multi-Control to turn pause on.
Pause :ON appears in the display. Play of the
current track pauses.
# To turn pause off, press Multi-Control
again.
Selecting the search method
You can switch the search method between
fast forward/reverse and searching every 10
tracks.
1
Use Multi-Control to select FF/REV.
FF/REV appears in the display.
# If the search method ROUGH SEARCH has
been previously selected, ROUGH SEARCH will
be displayed.
2
Press Multi-Control to select the search
method.
Press Multi-Control until the desired search
method appears in the display.
! FF/REV Fast forward and reverse
! ROUGH SEARCH Searching every 10
tracks
Searching every 10 tracks in
the current disc
If a disc contains over 10 tracks, you can
search every 10 tracks. When a disc contains
28
En
a lot of tracks, you can roughly search for the
track you want to play.
1
Select the search method
ROUGH SEARCH.
Refer to Selecting the search method on page
22.
2
Push and hold Multi-Control left or
right to search every 10 tracks on a disc.
# If a disc contains less than 10 tracks, pushing
and holding Multi-Control right recalls the last
track of the disc. Also, if the remaining number of
tracks after searching every 10 tracks is less than
10, pushing and holding Multi-Control right re-
calls the last track of the disc.
# If a disc contains less than 10 tracks, pushing
and holding Multi-Control left recalls the first
track of the disc. Also, if the remaining number of
tracks after searching every 10 tracks is less than
10, pushing and holding Multi-Control left re-
calls the first track of the disc.
Switching the tag display
It is possible to turn the tag display on or off, if
MP3/WMA disc contains text information
such as track title and artist name.
! If you turn the tag display off, time to play-
back will be shorter than when this func-
tion is turned on.
1
Use Multi-Control to select Tag Read.
Tag Read appears in the display.
2
Press Multi-Control to turn tag display
on.
Tag Read :ON appears in the display.
# To turn tag display off, press Multi-Control
again.
Publicité
Chapitres
Table des Matières
