Pausing Mp3/Wma/Wav Playback; Selecting Folders From The Folder Title List; Using Compression And Bmx; Selecting The Search Method - Pioneer SUPER TUNER III D DEH-P5800MP Mode D'emploi

Section
06 MP3/WMA/WAV Player
2 Press FUNCTION to select Scan.
Press FUNCTION until Scan appears in the
display.
3 Press a to turn scan play on.
Scan : ON appears in the display. The first 10
seconds of each track of the current folder (or
the first track of each folder) is played.
4 When you find the desired track (or
folder) press b to turn scan play off.
Scan :OFF appears in the display. The track (or
folder) will continue to play.
# If the display has automatically returned to
the playback display, select Scan again by press-
ing FUNCTION.
Note
After track or folder scanning is finished, normal
playback of the tracks will begin again.
Pausing MP3/WMA/WAV
playback
Pause lets you temporarily stop playback of
the MP3/WMA/WAV.
1 Press FUNCTION to select Pause.
Press FUNCTION until Pause appears in the
display.
2 Press a to turn pause on.
Pause : ON appears in the display. Play of the
current track pauses.
3 Press b to turn pause off.
Pause :OFF appears in the display. Play will re-
sume at the same point that you turned pause
on.
Selecting folders from the
folder title list
Folder title list lets you see the list of folder ti-
tles and select one of them to play back.
24
En
1 Press FUNCTION to select folder title
list.
Press FUNCTION until Root appears in the
display.
2 Press c or d to scroll through the list of
titles that have been entered.
# If selected folder contains files,
in the display.
3 Press a to play your favorite folder
title.
That selection will begin to play.
# If selected folder contains no files, NO FILES
will be displayed.

Using compression and BMX

Using the COMP (compression) and BMX
functions let you adjust the sound playback
quality of this player. Each of the functions has
a two-step adjustment. The COMP function
balances the output of louder and softer
sounds at higher volumes. BMX controls
sound reverberations to give playback a fuller
sound. Listen to each of the effects as you se-
lect through them and use the one that best
enhances the playback of the track or CD that
you are listening to.
1 Press FUNCTION to select Comp./BMX.
Press FUNCTION until Comp./BMX appears
in the display.
2 Press a or b to select your favorite set-
ting.
Press a or b repeatedly to switch between the
following settings:
Comp./BMX OFFComp. 1Comp. 2
Comp./BMX OFFBMX 1BMX 2

Selecting the search method

You can switch the search method between
fast forward/reverse and searching every 10
tracks.
appears